Microporous Tape and Steripore Safe Tape Manufacturer

 The Sterimed microporous tape, Steripore Safe, is an extremely popular, hypoallergenic, microporous tape. The Sterimed microporous tape fights with infection and helps recuperate safely due to its unique anti-microbial properties. It is gentle to the skin, adheres well and leaves minimal adhesive residue upon removal.

The applications of the Sterimed microporous tape, Steripore Safe, include fixation of dressing, tubing, ostomy pouches in post-surgical care.

SPECIFICATIONS :

Used for fixation of dressing, tubing, osteomy pouches etc in post-surgical care

Made from Microporous fabric and specially coated with a broad spectrum Anti-Microbial agent for enhanced infection control

A one-of-its-kind product, it minimizes the risk of the tape itself being a carrier of infection

Hypoallergenic, non-toxic, non-irritant uniform adhesive coating

Manufactured as per British Pharmacopia (BP) guidelines

Endotracheal Tube Cuffed and Endotracheal Tube Plain

The Sterimed endotracheal tube comes in two variants – Endotracheal Tube Cuffed and Endotracheal Tube Plain. The Sterimed endotracheal tube is made from non-toxic, non-irritant, medical grade clear PVC.

The endotracheal tube, also known as the ET Tube is used to maintain a patent airway and mechanically ventilate patients. The Sterimed endotracheal tube is kink resistant, thin-walled, thermo-sensitive tube, softens at body temperature.

SPECIFICATIONS

• The Sterimed endotracheal tube or ET tube has a smooth inside/outside surface for ease in intubation, extubation and suctioning.

• The Sterimed endotracheal tube or ET tube has smooth polished murphy eye, distal end and tapered balloon end for atraumatic intubation and extubation.

• The Sterimed endotracheal tube or ET tube is kink resistant inflation tube to ensure patient safety during cuff inflation and deflation.

• Radio opaque line and markings on the Sterimed endotracheal tube or ET tube facilitate identification of tube position.

• The Sterimed endotracheal tube or ET tube has a universal 15 mm connecter at the proximal end.

• The Sterimed endotracheal tube or ET tube is E.T.O Sterile and pyrogen free. It is meant for single patient use only.

All Silicon Foley Balloon Catheter-Model BH (Bladder Health)

 

Sterimed – Pioneers in Medical and Surgical Devices presents the All Silicon Foley Balloon Catheter model BH - an innovative product which is designed to maintain Bladder health as well as provides a Low Friction Surface for lesser trauma.

The Sterimed All Silicon Foley Balloon Catheter – Model BH , this innovative product comes with a Flow Control Clamp as a part of the catheter funnel.

Due to the Flow Control Clamp the All Silicon Foley Balloon Catheter provides the below mentioned benefits over the normal Foley balloon catheters:-

1.     Helps the Bladder muscles to function properly.

2.     Lowers the risk of infection by avoiding the necessity of connecting the urine collection bag.

3.     Lowers the risk of Balloon tearing due to low durometer and high elasticity.

4.     Lower Friction on the surface reduces trauma during intubation and extubation.

To explain these benefits we would like you to spare 2 minutes of your precious time to go through the film attached in this mail below.

High-Flow Foley Balloon Catheter

The Foley Balloon Catheter is a flexible tube that is used by the medical practitioners to drain the urine from the bladder. The Foley Balloon Catheter is an indwelling Catheter, which is used to assist people who cannot urinate on their own due to surgery/ old age etc.

 The normal Foley Balloon Catheter is used for short term urine drainage and faces a common problem of blockage caused due to Salt Encrustation. Every time the Catheter needs to be replaced   due to blockage and failure, it increases the cost of consumables and also the discomfort caused to the patient is significant.

Sterimed Introduces High-Flow Foley Balloon Catheter to overcome the problems of a normal Foley Balloon Catheter. High-Flow Foley Balloon Catheter has a coating of silicon Elastomer which, when compared to uncoated catheters leads to a 54% fall in the coefficient of friction.  Meaning, the possibility of tissue damage and trauma is reduced to half.

The Sterimed High-Flow Foley Balloon comes with a Unique four layer system that overcomes the drawbacks of a normal Foley Balloon Catheter. 

The first and the inner most layer is made of the Non Adherent Silicon Elastomer that deters salt crystals from attaching themselves to the Catheter’s inner surface. This reduces the chance of blockage.

The second layer is made up of High Strength Polymer in the middle of the catheter that provides strength to the Catheter wall and ensures wider inner diameter allowing a larger Lumen Size. This larger lumen size allows higher flow rate and thus the name given High-Flow Foley Balloon Catheter. 

The third layer is made from special Low Protein Latex with suitable anti-oxidants, forming the main body of the Catheter providing it softness and keeping it low in allergens.

The outermost layer or say the fourth layer that comes in contact with the body is made of Silicon Elastomer that minimises the occurrence of Allergy and irritation when the catheter comes in contact with the patient.  Also in case of Elastomer coated Catheter, the coefficient of friction remains consistently low ensuring a trauma free removal of the Catheter.

Hence the Sterimed High- Flow Foley Balloon Catheter minimises blockages, increases flow rate, has longer in – dwell time and provides patients comfort and cost savings.

High-Flow Foley Balloon Catheter comes in two variants – High- Flow 2 Way and High– Flow 3 way. Two-Way High Flow Foley Balloon Catheter comes in the sizes of 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 FRG. The Three-Way High Flow Foley Balloon Catheter comes in  16, 18, 20, 22, 24, 26, 28, 30 FRG sizes.